Nu-Fronts, Inc. Kitchen Refacing Systems

Use and Care for Laminate Surfaces
Ordinary Cleaning

Formica brand laminate, ColorCore surfacing material, and DecoMetal Collection items are very easy to clean.

  • In most cases, you only need to use a clean, damp, non-abrasive cotton cloth and a mild liquid detergent or household cleaner.
  • Rinse with clean water, using a clean, non-abrasive cotton cloth.
  • Do not flood the laminate, especially near seams, since water can penetrate and cause the substrate to swell.
  • Dry the surface with a soft, clean, non-abrasive cotton cloth.

For specific types of surfaces, use the following care guidelines.

Matte and Sparkle Finish Laminates. Especially hard-to-clean areas may require special attention. Use a nylon-bristled hand or vegetable brush, along with a mild liquid detergent-and-water solution or household cleaner. Clean the solid area, using a rotating motion. Rinse and dry the surface as indicated above.

Sculptured and Dimensional Finish Laminates. These surfaces may require special attention to clean the depressed areas. Use a nylon-bristled hand or vegetable brush, along with a mild liquid detergent-and-water solution or household cleaner. Clean the solid area, using a rotating motion. Rinse and dry the surface as indicated above.

High Gloss Finish Laminates. If residual streaks and smears remain after normal cleaning, use mild glass cleaner and then dry wit ha clean, non-abrasive cotton cloth.

DecoMetal Collection. Clean thee items with a soft, clean, damp, non-abrasive cotton cloth and a mild liquid detergent. Do not use solvents or waxes on DecoMetal Collection surfaces. Mild glass cleaners may be used to remove streaks.


| Home | About Us | Products | Testimonials | Use & Care | FAQs | Contact Us |


12005 Prospect Road • Strongsville, Ohio 44149-2935

(440) 238-6288
info@nufronts.com